Consumer products

Get exactly the support you need
Looking for specific solutions for your product?

It takes a long time for my Philips kettle to boil water

If it takes too long for your Philips kettle to boil water, there might be a simple solution. Find out how to solve it yourself here.

The heating element inside your kettle is probably covered with scale.

Please descale the kettle by doing the following:

  1. Fill the kettle with water up to three-quarters of the maximum level and bring the water to the boil.
  2. After the kettle has switched off, add white vinegar (8% acetic acid) to the maximum level.
  3. Leave the solution in the kettle overnight.
  4. Empty the kettle and rinse the inside thoroughly.
  5. Fill the kettle with fresh water and boil the water.
  6. Empty the kettle and rinse it with fresh water again.
  7. Repeat the procedure if there is still some scale in the kettle.

Regular descaling prolongs the life of your kettle.
Never use natural vinegar or white vinegar with an acetic acid content higher than 8%, as this may damage the inside of your Philips kettle.

Descaling instructions with citric acid or a descaling agent

If you dislike the smell of vinegar, you can descale your Philips kettle using citric acid or a descaling agent. In that case, follow the instructions on the package of the descaler.