1
Consumer products

Get exactly the support you need
Looking for specific solutions for your product?

Why does the sterilizing process take longer than usual?

The sterilizing process may take longer than usual because you poured too much water into the sterilizer.

To ensure accurate sterilization you should follow the following instructions:

  1. Measure and pour exactly 100 ml/3.5 oz of pure, fresh water directly into the water reservoir.
  2. Make sure all parts that need to be sterilized are completely disassembled and place them in the basket with their openings pointing down to prevent them from filling up with water.
  3. When you fill the small basket:
  4. Put the nipples on the bottom of the basket
  5. Place the screw rings loosely on top of the nipples
  6. Clip the bottle dome caps into the holders

Our site can best be viewed with the latest version of Microsoft Edge, Google Chrome or Firefox.